Call for Pricing and to Order

Designed for fire protection vehicles with a wheel diameter of up to 44".

Roadblocks 2514 Series All-Terrain Urethane Wheel Chocks are specifically designed for use on fire equipment. They comply with NFPA1901-03 and meet SAE-J348 standard for up to 44 inch wheel diameters. These tough, damage resistant polyurethane chocks are resistant to oils, fuels and solvents, and feature high strength aluminum base plates with posi-grip traction cleats or anti-slip rubber traction pads. For added safety and convenience, Checkers incorporates a molded carrying handle and safety colors for easy identification.

Mounting brackets are available for these wheel chocks.

Features

* RATED FOR: Fire protection vehicles with up to 44" wheel diameter.

* Complies with NFPA 1901-1903.

* Meets SAE-J348 standard.

* Third party tested for compliance.

* Tough polyurethane construction.

* Resistant to oils, fuels and solvents.

* Aluminum traction cleats.

* Recessed carrying handle.

* Safety color visibility.

WARNING - WHEEL CHOCK USER GUIDELINES

* Improper use may result in product failure. * Select wheel chock according to vehicle type and size. * Always use in pairs and on firm surfaces. * Chock in direction of grade. * Chock both sides of wheel if direction of grade is undetermined. * Use only after parking brake is applied and tested. * Center chocks snugly and squarely against tread of each wheel. * Always test chocks to insure they meet requirements. * Do not drive over wheel chocks.

OSHA SPECFIES

1910.178 (k) Trucks and railroad cars. (1) the brakes of highway trucks shall be set and wheel chocks placed under the rear wheels to prevent the trucks from rolling while they are boarded with powered industrial trucks.

NFPA MOUNTING REQUIREMENTS

NFPA STANDARDS REQUIRE WHEEL CHOCKS TO BE MOUNTED ON FIRE APPARATUS BEFORE BEING PLACED INTO SERVICE. Two Chocks must be mounted and readily accessible per NFPA 1901 (Section 7-2), 1902 (Section 7-2), and 1903 (Section 6-1).